Some time ago I got a very basic cardreader to use with my eID. It was fairly easy to get this working under Linux, only had to create one ebuild for the acr38 driver. Looks like you don't even need the Zetes/FedICT tools to do authentication in Firefox, the standard OpenSC libs work too.
For the record: what you need is opensc, pcsc, and the acr38 driver, that's about it to start playing around. The FedICT tools are nice to play around and view which data is stored on the card.
Anyway, on-topic now :-) In my previous post I wondered whether it'd be possible to get an SSL certificate, using the key on my card. Looks like this is easier than I thought :-)
You need to have openssl (du-uh) and engine-pkcs11 installed to do this.
To generate a request, open a console and launch openssh. Once at the OpenSSL prompt, issue these 2 commands:
engine -t dynamic -pre SO_PATH:/usr/lib/engines/engine_pkcs11.so -pre ID:pkcs11 -pre LIST_ADD:1 -pre LOAD -pre MODULE_PATH:/usr/lib/opensc-pkcs11.so
Adjust paths if necessary, of course. This loads the pkcs11 engine inside OpenSSL.
req -engine pkcs11 -new -days 100 -key id_02 -keyform engine -out myrequest.csr -subj "/C=BE/ST=O-VL/O=My Organisation/CN=My Name/emailAddressfirstname.lastname@example.org"
Adjust the days, out and subj parameters, at least. The key ID can be found using
pkcs15-tool -cUse the ID of the Authentication X509 certificate.
You'll be asked to enter your PIN code, once this is done your certificate signing request will be stored in myrequest.csr (or whatever filename you chose), ready to be sent to some CA administrator, after which he can sign the request (added code to do this to CAAdmin some minutes ago, about to commit), send back the certificate, and you're all set.
How to use the certificate depends on your application, of course. You can add the pkcs11 authentication provider to Firefox, OpenVPN got some pkcs11-related settings, etc.
I'll try the OpenVPN stuff in a minute :-)
Pretty cool stuff, if this'd work... Both VPN and SSH authentication will be done using my eID if this turns out well.
Edit: right, I was able to sign my generated request (using my eID's authentication certificate) using our VPN's CA, but now I got some issue with issuer certificates: OpenVPN seems to look for an issuer certificate matching the C/CN/SN/GN/serialNumber of the certificate on my eID. This is, obviously, not the way I'd want it to work... Isn't it possible to tell OpenVPN to use some_file.crt as certificate, but use the key in some slot on my eID as key? Using PKCS11 seems to disable the ability to use file-based certificates :-(